top of page
Homepage
product1_banner_6A.webp

Data Converter

We offer five distinct series.

Each series includes multiple modles
ensuring the different combination for field data connection.

1. HART - RS232/485 Modbus Converter

  • Links up to four HART instruments

  • HART 7.0 support and backward compatible

  • Transparent HART communication and Modbus RTU

  • RS232 and/or RS485 ports

  • Maps all process variables (PV, SV, TV, QV), diagnostic data, and device status

  • Configurable parameters and custom commands

  • Includes setup software for configuration

Get a Demo

Models

GRT-2      Input:          HART     

                  Output:       1 x RS485 Modbus

​

GRT-4      Input:          HART     

                  Output:       1 x RS232, 1 x RS485 Modbus

​

GRT-6      Input:          HART     

                  Output:       2 x RS485 Modbus

2. HART - TCP Modbus Converter

  • Reads HART instrument data

  • Acquires one analog and two digital inputs

  • Supports 4–20 mA and 0–5 V analog signal

  • Configurable parameters, range, and zero point

  • Retains configuration settings after power loss

  • Local and remote parameter configuration

  • Allows parameter configuration over Ethernet

  • HART communication and power status LED

Get a Demo

Models

HTC-100      Input:          1 x HART     

                        Output:      TCP Modbus

​

HTC-102     Input:          1 x HART, 1 x Analog, 1 x Digital

                      Output:       TCP Modbus

3. Modbus/AD - HART Converter

  • Converts Modbus RTU data into HART device variables

  • Supports an RS485 Modbus RTU interface

  • Converts analog measurements into HART device variables

  • Supports two or four 4–20 mA analog inputs

  • Provides a HART compatible 4–20 mA output

  • Allows configuration of the analog range and zero point

  • Supports local querying and configuration of parameters

Get a Demo

Models

MHT-11      Input:          RS485 RTU Modbus

                      Output:       HART 4-20mA

​

MHT-12      Input:          RS485 RTU Modbus, 2 x 4-20mA

                      Output:       HART 4-20mA

​

MHT-14      Input:          4 x 4-20mA

                      Output:       HART 4-20mA

4. HART - RS485 / TCP Modbus Converter

  • Reads 4 HART instruments data

  • Configurable RS485 output port

  • Supports Modbus_RTU and Modbus_TCP

  • Stores acquired data in EEPROM at a configurable interval

  • Retains configuration settings after power loss

  • Supports local and remote parameter queries and configuration

  • Allows parameter configuration over Ethernet

  • Provides power and HART communication status indicators

Get a Demo

Models

HTC-200      Input:          1 x HART     

                        Output:      1 x RS485 Modbus

​

HTC-202      Input:          1 x HART

                       Output:       1 x RS485 Modbus, TCP Modbus

5. RS232/485 Multi-Channel Converter

  • One serial input from instruments and devices

  • Support transmission of standard Modbus RTU

  • Support non-standard Modbus RTU communications

  • Standard RS232 or RS485 communication interfaces

  • Supports connections of multiple data acquisition devices

  • Adjustable port parameters e.g. baud rate, parity, stop bits

  • Retain configuration settings when power is off

Get a Demo

Models

MX-101      Input:          1 x RS232/485 Modbus/non-standard

                      Output:      3 x RS485 multi-master single slave

​

MX-102      Input:          1 x RS232/485 Modbus/non-standard

                      Output:      2 x RS485 multi-master single slave

​

MX-103      Input:          1 x RS232/485 Modbus/non-standard

                      Output:      3 x RS485 Modbus protocol

​

MX-104      Input:          1 x 485 Modbus

                      Output:      3 x Analog 4-20mA

Get a Quote

Model
bottom of page